Communications Software/Drivers Alphabetical Full Product Listing - Search Section 1. AB Bulletin 1609 UPS TOP Server OPC+IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE, to connect them to AB Bulletin 1609 UPS’s or any device supporting the Simple Network Management Protocol. Communications Protocols supported by this driver are the Simple Network Management Protocol (SNMP). 2. AB Bulletin 900 Controllers TOP Server OPC and I/O Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Allen-Bradley Bulletin 900 Temperature Controllers via RS-232/485 serial connections. This driver is unique in that it provides built in support for dial up modems and also supports our Ethernet Encapsulation techniques. 3. AB OPC 5 License Pack with OPC Data ActiveX Control Bundle This bundle provides 5 licenses of our AB OPC Server with a runtime free license of our OPC Data ActiveX control that gives VB OPC client capabilities with minimal effort and code. This bundle is ideal for the user wanting to use the AB OPC server with Visual Basic. 4. AB OPC Server for Ethernet,DH+,DH485,DF1 by INGEAR, Single License OPC Server to connect to AB PLC5, SLC5/xx, ControlLogix, and Micrologix PLCs via Ethernet, DF1, DH+, DH-485. NO RS LINX Licenses needed! Supports PCI Bus Card Interfaces on Windows NT & 2000. Supports ControlLogix native tag addressing. 5. AB OPC Server for Ethernet,DH+,DH485,DF1,by INGEAR-5 License Pack Save 20% with this 5 Pack of Licenses of our AB OPC Server for connecting software to AB PLC5, SLC5/xx, ControlLogix, and Micrologix PLCs via Ethernet, DF1, DH+, DH-485. NO RS LINX Licenses needed! 6. AB OPC Server, by INGEAR, Sololink to Full License Upgrade Owners of the INGEAR AB OPC server with a SoloLink license may purchase this item to upgrade to the full INGEAR AB OPC Server license. 7. AB OPC Server+OPC Data ActiveX Runtime Free Bundle This bundle provides a single machine license of our AB OPC Server with a runtime free license of our OPC Data ActiveX control that gives VB OPC client capabilities with minimal effort and code. This bundle is ideal for the user wanting to use the AB OPC server with Visual Basic. 8. Advanced Tag Plug-in The Advanced Tag Plug-in provides added features to any TOP Server driver in addition to special features for use with the TOP Server Oracle connector Plug-ins. Advanced tags are used to perform simple analytics such as math, logic and evaluation functions on other tags. There are currently six types of Advanced Tag: Average, Minimum, Maximum, Derived, Complex, and Oracle Cumulative. Complex tags are for use with the TOP Server Oracle MOC Connector Plug-in. 9. Allen-Bradley Suite TOP Server OPC-ControlLogix Family, PLC5/SLC/Micro Family This OPC driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,OSIsoft PI,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Allen-Bradley PLC 5, SLC 5/xx, MicroLogix Family, ControlLogix PLCs and ControlLogix Gateways, CompactLogix, and FlexLogix PLCs. Native ControlLogix Tag Addressing with Optimizations is supported. 10. Analog Devices 6B TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Analog Devices 6B I/O Modules. This driver is unique in that it provides built in support for dial up modems. 11. Aromat Suite (serial+ethernet) TOP Server (OPC, FastDDE,SuiteLink,AdvancedDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Aromat/NAIS/Matsushita PLCs via their Computer Link Serial protocol or MEWTOCOL Ethernet Link. This driver is unique in that it provides built in support for dial up modems also supports our Ethernet Encapsulation techniques. 12. Automation Direct / PLC Direct / Koyo EBC Ethernet TOP Server This driver is used to connect your software applications to Automation Direct/Koyo/PLC Direct EBC ethernet modules in DL205 or DL405 series I/O Racks, Terminator I/O, and GS1, GS2, Durapulse(GS3) AC Inverter drivers. 13. Automation Direct / PLC Direct / Koyo PLCs K-Sequence Serial Protocol TOP Serve This driver is part of the Automation Direct TOP Server Suite. For full details click here.click here. 14. Automation Direct (Koyo PLCs/PLC Direct) PLCs TOP Server Suite This suite of drivers provides connectivity to Automation Direct PLCs via TCP/IP Ethernet to ECOM offered by AutomationDirect and P3000 Devices via Modbus TCP/IP, as well as serial DirectNet and K-Sequence Protocol support. You get licenses for all of these drivers when you purchase this item. 15. BACnet OPC Server (TOP Server BACnet Ethernet Driver) This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to building automation system devices that use the BACnet protocol over Ethernet, often referred to as BACnet/IP or Annex J, including gateway devices. 16. Bailey Fischer & Porter Micro-DCI TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE This software product is used with software applications that need to read/write data with MicroDCI controllers. This software provides the driver/connection between your application and the hardware. We work with every major HMI/SCADA system plus VB, VB.NET/C#, and more. 17. Beckhoff TwinCAT TOP Server OPC+IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE, to connect them to Beckhoff Twin CAT PLC, BC9xxx Coupler Controller and BX9xxx Coupler controller. The Beckhoff TwinCAT Driver is specifically designed to communicate with a Beckhoff TwinCAT software system. The Beckhoff TwinCAT software system turns any compatible PC into a real-time controller with a multi-PLC system, NC axis control, programming environment and operating station. 18. BlockDiff Option for S5 and S7 for Windows PLC Prog. Software BlockDiff is an optional, integrated, 32 bit application of S5 / S7 for Windows® that provides detailed information about the differences between two Siemens PLC programs. 19. BusVIEW for LabVIEW (Modbus) - PC Version- Runtime Edition This item provides rights to distribute BusView with a compiled LabView project to another computer other than your development computer. 20. BusVIEW for LabVIEW VI (Modbus) - PC Version- Development Edition Connect National Instruments Labview or Bridgeview up to Modicon PLCs and other Modbus Serial ASCII/RTU protocol compatible devices (there are hundreds of them) using this VI driver. 21. BUSWARE Ethernet I/O TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) Use this software to connect your PC to BUSWARE Ethernet RTU`s via TCP/IP Ethernet using the Modbus OPEN UDP protocol. This software is an OPC server that works with any OPC client application. 22. Cascade DataHub License-Linux This license provides all functionality of Cascade Data Hub for Linux for use on a single computer. 23. Cascade DataHub-Linux-TCP Link License Purchase of this item provides a license for a single concurrent remote connection to the Cascade DataHub via TCP/IP using your application written using the Cascade DataHub API. 24. Contrex/Fenner CX1000 TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) Use this OPC server to connect OPC client application software including most HMIs to Contrex/Fenner CX1000 motion controllers via serial connection. 25. Contrex/Fenner M Series TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) Connect Contrex/Fenner M Series Motion Controllers via serial connections to HMI/MMI/SCADA applications and other OPC client applications using this OPC server. 26. Cutler Hammer D50/D300 PLC´s TOP Server (OPC, FastDDE,SuiteLink,AdvancedDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Cutler Hammer D50/D300 PLCs via serial connections. This driver is unique in that it provides built in support for dial up modems also supports our Ethernet Encapsulation techniques. 27. Cutler Hammer ELC Suite TOP Server OPC+IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Cutler-Hammer ELC models (PA, PB and PC series)devices using serial RS-232/485 connections and Cutler-Hammer ELC (Model – PV Series) via Ethernet. Both drivers support for dial up modems and the serial driver also supports our Ethernet Encapsulation. 28. DataForth IsoLynx TOP Server OPC and I/O Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to ISOLYNX SLX100 data acquisition systems via serial or ethernet connections. 29. DDE Server Bridge This software product is used to connect software applications that are OPC Client applications to legacy DDE server applications. For example, connect your new OPC compliant HMI application to existing HMI applications that support DDE or their DDE server drivers using this tool. 30. DNP 3 Suite TOP Server - 10 Device License (Currently V4 Only) Driver to connect your HMI/SCADA/MES system to up to 10 DNP 3.0 Slave Devices via serial, ethernet encapsulated serial, or true TCP/IP Ethernet connections. The driver acts as a DNP Master. No tag count limits or limits on # of connected OPC clients. Supports Unsolicited message with DNP devices and user configurable polling rates, timeouts, and more. 31. DNP 3 Suite TOP Server - 50 Device License (Currently V4 Only) Driver to connect your HMI/SCADA/MES system to up to 50 DNP 3.0 Slave Devices via serial, ethernet encapsulated serial, or true TCP/IP Ethernet connections. The driver acts as a DNP Master. No tag count limits or limits on # of connected OPC clients. Supports Unsolicited message with DNP devices and user configurable polling rates, timeouts, and more. 32. DNP 3 Suite TOP Server - Unlimited Device License (Currently V4 Only) Driver to connect your HMI/SCADA/MES system to your DNP 3.0 Slave Devices via serial, ethernet encapsulated serial, or true TCP/IP Ethernet connections. The driver acts as a DNP Master. No tag count limits or limits on # of connected OPC clients. Supports Unsolicited message with DNP devices and user configurable polling rates, timeouts, and more. 33. DRaX Dual Redundant ActiveX for Wonderware InTouch-Server License DRaX (Dual Redundant ActiveX) is a software solution for systems running SCADA applications based on Wonderware InTouch. DRaX automatically manages the behavior of a dual redundant InTouch system. Such systems guarantee data availability even in case of a failure of the primary data source or a failure of primary I/O communication (PLC). If this happens then DRaX redirects all client applications to the backup data source. 34. Eurotherm Controls EI-BiSynch Protocol ActiveX Connect Eurotherm Controls Devices using EI-BiSynch Serial Protocol to your Visual Basic (VB) or Visual C++ applications with this runtime free ActiveX control 35. Fisher ROC Suite TOPServer - 10 Device License Driver to connect your HMI/SCADA/MES system to up to 10 Fisher ROC devices via serial or ethernet encapsulated serial. No tag count limits or limits on # of connected OPC clients. 36. Fisher ROC Suite TOPServer - 50 Device License Driver to connect your HMI/SCADA/MES system to up to 50 Fisher ROC devices via serial or ethernet encapsulated serial. No tag count limits or limits on # of connected OPC clients. 37. Fisher ROC Suite TOPServer - Unlimited Device License Driver to connect your HMI/SCADA/MES system to your Fisher ROC devices via serial or ethernet encapsulated serial. No tag count limits or limits on # of connected OPC clients. 38. Fuji Flex PLCs Serial Connection TOP Server This communications driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvanceDDE and DDE to connect them to Fuji Flex PLCs using an RS-232/485 connection. 39. GE CCM Protocol TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) This FastDDE/DDE server is used to connect to GE Fanuc Series One, 5, and 6 PLCs using the legacy CCM protocol. If you have newer Series 90 PLCs you should use SNP, SNP-X, or Ethernet Protocol - click "related items" for more information on those drivers. 40. GE Ethernet OPC Server by INGEAR, SoloLink to Full Version Upgrade Owners of the INGEAR GE Ethernet OPC server with a SoloLink license may purchase this item to upgrade to the full INGEAR GE Ethernet OPC Server license. 41. GE Fanuc Ethernet Global Data TOP Server I/O Server This GE Ethernet Global Data OPC server is used for very specific applications involving the use of GE Fanuc Ethernet Global Data protocol, which is an unsolicited messaging form of communication used for large blocks of data sent among large numbers of PLCs. Read below to determine if this driver is best for your application. Our regular GE Ethernet OPC server may be your best solution for your application. 42. GE Fanuc Focas (1 and 2) Ethernet for CNCs TOP Server I/O Server This communications driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvanceDDE and DDE to connect them to GE Fanuc CNCs models in the i series. Models supported include the 0i, 15, 15i, 16, 16i, 18, 18i, 21, 21i, 30i, 31i, 32i and Power Mate i. 43. GE Fanuc TCP/IP Ethernet OPC Server, by INGEAR The INGEAR GE Ethernet OPC Server provides TCP/IP Ethernet connections from all major HMI software to GE Fanuc PLCs using their SRTP Ethernet protocols. Works with Series 90-30, 90-70, Versamax PLCs, and Horner OCS/RCS units with Ethernet interfaces. All major PLC data types supported. Works on Windows 95/98/Me/NT/2000/XP. 44. GE Fanuc TOP Server Suite (OPC, FastDDE,SuiteLink,AdvancedDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to GE Fanuc Series 90-30, 90-70, Versamax, PacSystems RX3i, and PacSystems RX7i PLCs via TCP/IP Ethernet connections using GE Fanuc SRTP protocol. This Suite also contains drivers for GE SNP, SNP-X serial protocols and for GE EGD Ethernet. 45. GE SNP TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to GE Fanuc Series 90-30, 90-70, 90-Micro,Versamax family members via Series 90 Protocol (SNP) over RS-232/485 connections. This driver is unique in that it provides built in support for dial up modems. 46. GE SNP-X TOP Server (OPC, FastDDE,SuiteLink,AdvancedDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to GE Fanuc Series 90-30, 90-70, 90-Micro,Versamax family members via SNP-X protocol over RS-232/485 connections. This driver is unique in that it provides built in support for dial up modems. 47. HighwayVIEW for LabVIEW (A-B PLCs) V4 - Macintosh-Development Edition 48. HighwayVIEW for LabVIEW VI (A-B PLCs) V4 - PC Version- Development Edition Use this driver with National Instruments Labview to connect to Allen-Bradley (AB) PLCs via serial or Data Highway Plus or Data Highway 485 connections. This item is a development license - you purchase this and then runtime licenses for each machine you will install the driver on with your Labview app (see related items for runtime licenses) 49. IDEC Micro 1,3,FA2J,FA2,FA3S,ONC PLC´s TOP Server This communications driver product is intended for use with applications such as Wonderware,WinCC,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to IDEC Micro,FA, and ONC family PLCs via serial connections. This driver is unique in that it provides built in support for dial up modems also supports our Ethernet Encapsulation techniques. 50. IN-GEAR32 GE, Ethernet Edition - One Year Maintenance Subscription Purchase this item in conjunction with the GE Ethernet ActiveX control (41232148) to obtain upgrades and additional support services for your license. 51. INGEAR AB ActiveX Studio Edition V6.0-DF1,DH+/485,Ethernet-Developer License New Version 6.0 Connect your custom Visual Basic (VB) or Visual C++ application to Allen-Bradley PLCs via TCP/IP Ethernet, DH Plus, DH-485, or DF1 serial with this ActiveX control. Supports PLC5, SLC 5/xx, ControlLogix, CompactLogix and Micrologix. Why buy multiple products like some vendors require when this one will cover them all at a very affordable, free price, which includes runtime-free distribution. 52. INGEAR AB ActiveX Studio Single Computer License - Version 6.0 This license gives you all the power of the INGEAR AB ActiveX Studio Developer`s License without the Runtime Free Distribution rights. Perfect for that single computer installation or an additional Developer`s license 53. INGEAR GE ActiveX Controls - Additional Developer Licenses Use this item to add an additional developer seat license to your INGEAR GE ActiveX control license. 54. INGEAR Modicon ActiveX Control- Additional Developers Licenses Additional development license for any INGEAR32 Modicon ActiveX Control 55. INGEAR Modicon OPC Server for Win 95/98/NT -5 License Pack Save 20% when you buy 5 licenses of the INGEAR Modicon OPC server. 56. INGEAR Modicon Serial, Modbus Plus, Ethernet OPC Server- Single License Connect OPC client applications via Modbus, Modbus Plus, Modbus Ethernet - one low priced product handles all 3 protocols - why learn 3 products when you can know one 57. INGEAR OMRON Hostlink, Sysmac Link, and Ethernet OPC Server V3.x-Single License Connect Omron PLCs via Serial Hostlink, Sysmac Link, or Ethernet to OPC client applications using this OPC server. Works with major HMI and OPC client applications. 58. INGEAR Omron OPC Server 5 Pack with OPC Data ActiveX Bundle This bundle provides 5 licenses of our Omron OPC Server with a runtime free license of our OPC Data ActiveX control that gives VB OPC client capabilities with minimal effort and code. This bundle is ideal for the user wanting to use the Omron OPC server with Visual Basic and create an application where the OPC server and the VB application will be loaded onto multiple machines. 59. INGEAR Omron OPC Server-Sololink to Full License Upgrade Owners of the INGEAR Omron OPC server with a SoloLink license may purchase this item to upgrade to the full INGEAR Omron OPC Server license. 60. INGEAR.NET.ABLink .NET Additional Developer License Purchase of this item provides a license for an additional single developer at the same company to use the INGEAR.NET.ABLink components to design, test, and deploy .NET applications to other computers. For Visual Studio 2005 and above. 61. INGEAR.NET.ABLink .NET Computer Developer License (Runtime Free Distribution) Purchase of this item entitles a single developer to use the INGEAR.NET.ABLink components to design and test Winforms, Windows Services, Web Form Applications and Web Services on a single computer and then distribute those compiled applications to other computers. For Visual Studio 2005 and higher. 62. INGEAR.NET.ABLink .NET Single Computer License (No Runtime Distribution) Purchase of this item entitles a single developer to use the INGEAR.NET.ABLink components to design and test .NET applications on a single computer. No distribution of the application is permitted with this license. Should you need distribution rights, please see our INGEAR.NET.ABLink Computer Developer License. For Visual Studio 2005 and above. 63. INGEAR.NET.ABLink+Instrumentation.NET Pro Pack Bundle This Software Toolbox EXCLUSIVE special bundle provides you with the tools to build a powerful and very functional machine interface application using our Instrumentation.NET components that provide over 60 different user interface tools, and the INGEAR.NET.ABLink component to connect to your PLC. 64. INGEAR.NET.ABlinkCF Compact Framework Developers License (Runtime Free License) Purchase of this item entitles a single developer to use the INGEAR.NET.ABLinkCF components to design and test .NET applications on a single computer and then distribute those compiled applications to systems or devices that support the .NET Compact Framework. For Visual Studio 2005 and above. 65. INGEAR.NET.GELink Additional Developers License Purchase of this item provides a license for an additional single developer at the same company to use the INGEAR.NET.GELink components to design, test, and deploy .NET applications to other computers. 66. INGEAR.NET.GELinkCF Compact Framework Developers License w/Runtime Distribution Purchase of this item entitles a single developer to use the INGEAR.NET.GELinkCF components to design and test .NET applications on a single computer and then distribute those compiled applications to systems or devices that support the .NET Compact Framework. 67. INGEAR.NET.Logix-Additional Developer License Purchase of this item provides a license for an additional single developer at the same company to use the INGEAR.NET.Logix components to design, test, and deploy Winforms applications to other computers. 68. INGEAR.NET.Logix-Computer Developer License (CDL) Purchase of this item entitles a single developer to use the INGEAR.NET.Logix components to design and test Winforms, Windows Services, Web Form Applications and Web Services on a single computer and then distribute those compiled applications to other computers. For Visual Studio 2005 and higher. 69. INGEAR.NET.Logix-Single PC License Purchase of this item entitles a single developer to use the INGEAR.NET.Logix components to design, test, and deploy Winforms applications on a single computer. 70. INGEAR.NET.LogixCF Compact Framework Developers License (Runtime Free License) Purchase of this item entitles a single developer to use the INGEAR.NET.LogixCF Compact Framework components to design .NET applications on a single computer and then deploy those applications to systems that support the Compact Framework. 71. INGEAR.NET.MBLink Additional Developers License Purchase of this item provides a license for an additional single developer at the same company to use the INGEAR.NET.MBLink components to design, test, and deploy .NET applications to other computers. 72. INGEAR.NET.MBLinkCF Compact Framework Developer License w/Runtime Distribution Purchase of this item entitles a single developer to use the INGEAR.NET.MBLinkCF components to design and test .NET applications on a single computer and then distribute those compiled applications to systems or devices that support the .NET Compact Framework. 73. Instrumentation OPC Controls-OEM/Site Deployment License This item is used with our Instrumentation ActiveX controls that support OPC client capabilities to enable the OPC client capabilities in fully licensed mode. This license provides for use of the OPC capabilities on an unlimited number of machines. A base license of the proper product must also be owned for this license to be valid. 74. Instrumentation Pro Pack - 60 Components This package contains 60 powerful ActiveX and VCL Components for instrumentation-gauges,knobs,leds,instruments,trending,and many more in one runtime free package (using optional use OPC client capabilities requires deployment license). Use with VB, VC++, VBA, Delphi, C++ Builder to build industrial user interface and control system displays or with Wonderware, Intellution, Iconics, RS-View32, Labview, and other Industrial HMI packages. 75. InTouch Client Driver TOP Server (OPC to Wonderware InTouch Bridge) This product adds an OPC Server interface onto Wonderware InTouch systems. Unlike other solutions, this product automatically configures itself to expose your InTouch tags as OPC items, saving significant engineering time. Once installed, the product can expose all of the tags in the InTouch tag database as OPC items for OPC client applications such as ERP, MRP, Historian systems and others. Read/Write or Read only access supported, all user configurable. 76. IOTech Point Scan 100 Ethernet I/O TOP Server This communications driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to PointScan Ethernet RTUs and I/O using Modbus OPEN UDP protocol. 77. iSNMP OPC Server Suite 1-15 Device License This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to up to 15 devices that use the SNMP Protocol. 78. iSNMP OPC Server Suite 16-50 Device License This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to up to 50 devices that use the SNMP protocol. 79. iSNMP OPC Server Suite Unlimited Device License This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to devices that use the SNMP protocol. 80. KraussMaffei MC4 Ethernet TOP Server OPC and IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to KraussMaffei MC4-Injection Moulding Machines. The driver supports the TCP/IP transport protocol. 81. Linkmaster Universal OPC Data Bridge The LinkMaster Universal OPC Data Bridge software is designed to provide an automated and bi-directional means of data transfer between different control system hardware or between enterprise systems supporting OPC and shop floor systems supporting OPC. Linkmaster is a powerful, time and money saving integration tool that requires no programming expertise to use. 82. Mitsubishi FX, Q, and A Series Top Server OPC+IO Server-Serial and Ethernet This OPC driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Mitsubishi A, ANA, and Q Series PLCs via serial or ethernet and Mitsubishi FX Series PLCs via direct or point to point serial connections. This suite contains 4 drivers. 83. Modbus OPC Server 5 Pack with OPC Data ActiveX Bundle This bundle provides 5 licenses of our Modbus OPC Server with a runtime free license of our OPC Data ActiveX control that gives VB OPC client capabilities with minimal effort and code. This bundle is ideal for the user wanting to use the Modbus OPC server with Visual Basic and needing to put the OPC server and the OPC Data ActiveX onto multiple machines. 84. Modbus OPC Server with OPC Data ActiveX Bundle This bundle provides our Modbus Serial, Modbus Plus, and Modbus Ethernet OPC Server with our OPC Data ActiveX control that gives VB OPC client capabilities with minimal effort and code. This bundle is ideal for the user wanting to use the AB OPC server with Visual Basic and needing a low cost, single machine solution. 85. Modbus OPC Server+OPC Data ActiveX Runtime Free Bundle This bundle provides a single machine license of our Modbus Serial, Modbus Plus, and Modbus Ethernet OPC Server with a runtime free license of our OPC Data ActiveX control that gives VB OPC client capabilities with minimal effort and code. This bundle is ideal for the user wanting to use the AB OPC server with Visual Basic and install their VB OPC Client Application on multiple machines, runtime free talking to a single OPC server on one machine via DCOM. 86. Modbus Suite TOP Server (OPC, FastDDE,SuiteLink,AdvancedDDE) This item is a Suite Bundle containing Modbus RTU Master, RTU Slave, ASCII Master, Modbus Plus, and Modbus Ethernet drivers. This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvanceDDE and DDE to connect them to devices that use the Modbus protocols. 87. ODBC Client Driver for TOP Server The TOP Server ODBC client driver reads data out of any ODBC compliant database (i.e. text, Access, SQL Server, Sybase, Oracle, etc) and exposes the data as OPC items. Once setup as OPC items, any HMI/SCADA or other system that is an OPC client can read the data. 88. OmniServer Version 2.6 - Professional Edition Purchase of this item provides a single PC license of OmniServer Version 2.6, Professional Edition. Volume licensing and site licensing is available - please contact us for a quote. 89. OmniServer Version 2.6 - Server Edition Purchase of this item provides a single PC license of OmniServer Version 2.6, Server Edition. Volume licensing and site licensing is available - please contact us for a quote. 90. OmniWedge Version 2.6 Purchase of this item provides a single PC license of OmniWedge Version 2.6. Volume licensing and site licensing is available - please contact us for a quote. 91. Omron Communications Suite TOP Server (OPC, FastDDE,SuiteLink,AdvancedDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,OSIsoft PI,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them Omron PLCs via Hostlink Serial protocol, Fins Serial Protocol, FINS Ethernet Protocol, Fins Gateway, and selected Omron Temperature Controllers (see list in full description). Support for dial up modems and Ethernet encapsulation of serial comms is supported. 92. OPC Alarm.NET Real-time and historical alarming with alarm Logging to SQL Server, SQL Server Desktop, Access, Oracle, mySQL, and CSV files of up to 2500 tags/points. 93. OPC Client .NET An OPC Server to use with unlimited local and remote OPC Clients for OPC Systems.NET data for up to 2,500 tags. 94. OPC DA Client Driver TOP Server OPC & I/O Server The TOP Server OPC DA Client Driver can be used to aggregate data from a number of OPC Servers and made available to clients of the TOP Server through all supported interfaces, like SuiteLink, NIO/PDB and DDE. This provides the ability to connect to any OPC DA Server and connect your Wonderware, iFix or DDE Client through it’s native interface. This will provide the ability to replace FSGatway or OPCLink in many cases. 95. OPC Data ActiveX Control - Runtime Free License Purchase this item to obtain a runtime free license for distribution of the OPC Data ActiveX control along with a Single Machine Developer license. 96. OPC Data ActiveX Control-Single Dev+Runtime License The OPC Data ActiveX Control allows you to connect objects in your Visual Basic applications to any OPC Data Access Server without writing any code! Just drop the control on a form, browse your OPC servers and click to connect them to visual display objects on your form and press Run! Runtime free licenses available 97. OPC Data Logger, Microsoft Access Database Logging The OPC Data Logger is a cost-effective yet powerful solution for collecting process data and logging it to text files and databases. The OPC Data Logger is designed to be easy-to-use and flexible. The product is targeted at the kinds of applications where you don’t need a full-blown historian but don’t want to write a custom application. 98. OPC Data Logger, Text file logging The OPC Data Logger is a cost-effective yet powerful solution for collecting process data and logging it to text files and databases. The OPC Data Logger is designed to be easy-to-use and flexible. The product is targeted at the kinds of applications where you don’t need a full-blown historian but don’t want to write a custom application. 99. OPC Database .NET Data logging to SQL Server, SQL Server Desktop (MSDE), Access, Oracle, mySQL, and CSV files for up to 2,500 tags. 100. OPC DataHub Node License (Windows-NT/2000/XP/2003/Vista) This license provides all functionality of OPC Data Hub for use on a single computer running Windows NT, 2000, XP Home and Pro, Windows 2003 Server 32 bit and 64 bit editions, and VISTA. Example: Need to use OPC with Excel on same PC as your OPC server - this is all you need! 101. OPC DataHub TCP Link License (Windows) Purchase of this item provides a license for a single concurrent remote connection to the OPC DataHub from a Java Applet based application or your custom application using the OPC DataHub API. 102. OPC Mobile .NET 100% managed .NET component providing real-time data access and easy to use Windows Mobile device components for access to up to 2,500 tags. 103. OPC Recipe .NET Data transfer FROM SQL Server, SQL Server Desktop (MSDE), Access, Oracle, and mySQL to local and remote OPC Systems.NET Tags and OPC Servers for up to 2,500 tags. 104. OPC Report .NET Generate reports to printer, Acrobat Reader PDF, Microsoft Excel, Microsoft Word, HTML web pages, graphic TIF files, or simple text files using up to 2,500 tags. 105. OPC Route .NET Transfer data from local and remote OPC Servers to other local and remote OPC Servers for up to 2,500 tags. 106. OPC Server Manager-Network Edition The OPC Server Manager is a utility that is used to monitor the PLCs being used by the OPC Server. The concept behind the OPC Server Manager is to assist in maintaining your overall system integrity and performance. 107. OPC Server Manager-Single OPC Server Edition The OPC Server Manager is a utility that is used to monitor the PLCs being used by the OPC Server. The concept behind the OPC Server Manager is to assist in maintaining your overall system integrity and performance. 108. OPC Server Manager, Airlink Edition, Network Edition for Multiple OPC Servers This version of the OPC Server Manager is for users who are using Airlink Cellular CDMA Radios with Dynamic IP Addresses with a multiple TOP Server OPC Servers on different PCs. This is a more advanced edition of the product. 109. OPC Server Manager, Airlink Edition, Single OPC Server This version of the OPC Server Manager is for users who are using Airlink Cellular CDMA Radios with Dynamic IP Addresses with a single TOP Server OPC Server on a single PC. This is our most popular option. 110. OPC Time Monitor and Server Consolidator The OPC Time Monitor and Server Consolidator software product helps you turn raw data from your PLCs and process controllers and turn it into valuable information to help you improve your manufacturing efficiency and profitability in a wide range of applications. 111. OPC Web Alarm .NET Real-time and historical alarming. Alarm Logging to SQL Server, SQL Server Desktop, Access, Oracle, ODBC, mySQL, and CSV files for up to 2,500 tags. 112. OPC Web Controls.NET 100% managed ASP.NET component providing real-time easy to use ASP.NET WebForm components for access to up to 2,500 tags. 113. OPC Web Trend.NET Real-time 2D and 3D trending and with OPC Database.NET historical trending for ASP.NET web applications for access to up to 2,500 tags. 114. OPCData.NET Components-Runtime Free License Purchase of this item entitles you to develop an application using the OPCData.NET components on a single PC and deploy it to multiple computers. 115. OPCData.NET Components-Single PC License Purchase of this item entitles you to develop an application using the OPCData.NET components and deploy it to the same PC. 116. Optimation OptiLogic Top Server - OPC,FastDDE,Suitelink, AdvancedDDE This communications driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Optimation OptiLogic Ethernet I/O. 117. Opto22 Ethernet TOP Server OPC+IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE, to connect them to Opto22 Ethernet SNAP Industrial Controllers (SNAP PAC S-Series, SNAP PAC R-Series and SNAP-LCE), SNAP Brains (SNAP PAC EB-Series, SNAP Ultimate I/O, SNAP Ethernet I/O and SNAP Simple I/O) as well as, E1 and E2 Brain Boards. Communications Protocols supported by this driver are MMIO over Ethernet TCP/IP or UDP and CONT over Ethernet TCP/IP. 118. ORACLE Connectivity Suite (MES & MOC) This suite of plug-ins includes the Oracle Manufacturing Operations Center (MOC) Plug-In and the Oracle Manufacturing Execution System (MES) Plug-In. Write data to the Oracle MES and/or the Oracle MOC with this suite. Tight integration with the OPC Server provides unique benefits such as simple installation, easy config, high performance and tag browsing. Gather process data in real-time for analysis, without the need of a 3rd party collection system. 119. Partlow ASCII Devices Serial TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) Connect Partlow devices via ASCII serial protocol to any HMI package or OPC client application using this OPC server. 120. PLC Direct Ethernet ActiveX for ECOM Module Use this runtime free ActiveX control to connect software you are writing to PLC Direct (Automation Direct/koyo) PLCs via the ECOM protocol. This ActiveX supports DL200 and DL400 family PLCs via their H2-ECOM or H4-ECOM ethernet modules, as well as DL-05 and DL-06 PLCs with onboard Ethernet modules. This runtime free, 32-bit ATL based ActiveX control is capable of reading thousands of points per second to energize your Visual Basic (VB) or Visual C++ application with live data from PLCs. 121. PLC Direct Ethernet I/O ActiveX (use with EBC modules and DL200/400 I/O) Use this runtime free ActiveX control when you want to control PLC Direct DL200 or DL400 series I/O racks over ethernet directly without any PLC CPU in the rack. Works with Visual Basic and Visual C++. If you need to talk to a PLC CPU via Ethernet, get our PLC Direct ECOM ActiveX control instead. 122. PLC Direct/Koyo DirectNet Serial Protocol ActiveX Control Use this ActiveX control to connect to AutomationDirect (PLC Direct) PLCs in the DL 05, 06, 105, 205, 303, and 405 series using their DirectNet serial protocol - need to pull data into VB or VC++ - this is your tool! 123. Profibus and DeviceNet TOP Server OPC and I/O Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to devices via DeviceNet Master/Slave and Profibus DP Master/Slave. This driver presently supports the Hilscher CIF cards to accomplish their physical connections from your PC to the PLC or field devices. Data available through the OPC Server include I/O and diagnostics information. 124. Red Prairie Logistics Systems Transaction Driver for TOP Server This member of the TOP Server family was specifically designed to provide master and slave (i.e. two-way) communications with business logistics systems powered by software from Red Prairie systems. This driver also has unique possibilities for inter-system communications between TOP Server systems (see below). 125. Satt Bus Protocol TOP Server This driver in the TOP Server family provides SattBus protocol connectivity to SattCon and SattControl devices (full model list below) for any HMI/SCADA or other systems that can use OPC, Suitelink, FastDDE, AdvanceDDE, Intellution NIO, or DDE. 126. Sattbus Ethernet TOP Server OPC and I/O Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Sattcon devices communicating via the SattBus Ethernet interface and a standard Ethernet Card in the PC. 127. Scanivalve TOP Server OPC and I/O Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Scanivalve Ethernet protocol compliant controllers. 128. Siemens S5 and S7 PLCs Windows Programming Software Version 6 This package bundles support for Siemens S7 PLCs with the S5 support in the S5 for Windows programming package. 129. Siemens S5 PLCs Windows Programming Software Version 6 The S5 for Windows program is an excellent software tool for creating, modifying, testing, and documenting programs for Programmable Logic Controllers (PLC). S5 for Windows is used to program the SIEMENS PLC family SIMATIC S5 with the programming language STEP5. 130. Siemens S5/S7 Suite OPC+IO Server-PPI, Ethernet Master/Slave, AS511,3964 Driver This communications driver product is intended for use with applications such as Wonderware InTouch, Wonderware System Platform, Wonderware Historian,OSIsoft PI,Intellution, Iconics, Indusoft, Cimplicity, WinCC, Visual Studio and many other applications that support OPC, FastDDE, SuiteLink, Intellution NIO, AdvanceDDE and DDE to connect them to Siemens S5 and S7 PLCs through a wide range of protocols. This suite contains 6 drivers covering a wide PLC range. 131. Siemens S7 PLCs Windows Programming Software Version 6 S7 for Windows provides an efficient and straightforward programming system for the entire Simatic® S7-300® and S7-400® PLC-control series. The complete S7-instruction set is implemented in the Statement List (STL), Function Block Diagram (SFC) and Ladder Diagram (LAD) presentations. This software can be combined with S5 for Windows® or runs stand alone. 132. Simatic/TI 505 Suite TOP Server-Serial and Ethernet Drivers for TI5x5 PLCs This communications driver product is intended for use with applications such as Wonderware, WinCC, ProTool/Pro, Intellution, Iconics, Indusoft, Cimplicity, and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to TI/Siemens Simatic 505 PLCs via Serial NITP/TBP protocol or TCP/IP Ethernet connections. For Ethernet the CTI2572 or a CP1434-TCP card is used in the PLC rack to provide the ethernet connection on the PLC. 133. Simulator Suite for TOP Server OPC and IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE and provides a means by which you can generate simulated data and send it to the HMI system. You configure your "simulation" by simply setting up records in any ODBC database in a table and the driver "plays them back" to the client application as if they were live data. Simulations can be one-time runs or continuously repeating. 134. SIXNET UDR Driver and EtherTRAK™ IO TOP Server OPC Server Use this software to connect your PC to Sixnet EtherTRAK RTU`s via TCP/IP Ethernet using the Modbus OPEN UDP protocol. This software is an OPC server that works with any OPC client application. The UDR driver also included works with all SIXNET Controllers, RTUs and I/O devices that support the SIXNET UDR (Universal DRiver) protocol. This includes all VersaTRACK, SixTRACK, EtherTRACK, RemoteTRAK, and SiteTRAK products. 135. SLIK-DA OPC Server .NET/ActiveX v4.0 – Single Developer + Runtime Free License The Slik-DA .NET and ActiveX controls allows you to quickly and easily build OPC Server functionality into your existing application. Any OPC-Client will be able to Browse and select your developed OPC Server and also browse, select, read and write to Tags within your application. OPC Servers built with this toolkit can be deployed without paying any royalties. 136. Square D Serial - Symax/PowerLogic TOP Server (OPC, FastDDE,SuiteLink,AdvanceDD Connect SquareD Symax PLCs and PowerLogix power monitoring devices using point-to-point serial connections to any OPC client with this OPC server. This server has built-in modem support for remote applications.Works with all major HMI packages. 137. SWTB Extender for Visual Studio.NET and OPC Data Access This item provides everything you need to connect your Visual Studio.NET 2003/2005 application to your target OPC Data Access (DA) server(s) and build OPC client applications without writing code. Runtime free distribution included, subject to terms of the license agreement. 138. Symbol Factory.NET-OPC Client Enabled Edition This bundle provides a runtime-free license of Symbol Factory.NET along with a runtime-free license of OPC Extender.NET, adding point and click OPC DA client capabilites for all your .NET components 139. System Monitor TOP Server OPC+IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE, to connect select Counters for the Performance Objects and Instances that will be monitored. It will automatically generate static tags in the server based on the selections made in this dialog. The System Monitor Device Driver uses the Microsoft Performance Data Helper application interface to provide access to performance information on processes, threads and other system components 140. Telemecanique Unitelway TOP Server (OPC, FastDDE,SuiteLink,AdvancedDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Telemecanique PLCs supporting the UnitelWay protocol. This driver is unique in that it provides built in support for dial up modems. 141. Thermo Westronics Serial+Ethernet TOP Server This communications driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Thermo Westronics Chart Recorders via serial or Ethernet connections. The serial driver is unique in that it provides built in support for dial up modems and also supports Ethernet Encapsulation. 142. TIWAY TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) Connect TI (Siemens/TI) 5x5 series PLCs using the TIWAY Hostlink or Unilink Host Adapter interfaces to your HMI or other OPC client application with this OPC server. Note this OPC server makes a serial connection to the Hostlink or Unilink Host Adapter interface to the TIWAY network - this server does not support the TIWAY card that goes into your computer. 143. TOP Server Mitsubishi Ethernet Driver for Siemens MP270/277/370/377 Panels This driver provides connectivity from Siemens WinCC Flexible on MP270, MP277, MP370 & 377 Panels to Mitsubishi A and Q series PLCs via Ethernet. 144. TOP Server S7 Ethernet OPC Server for Siemens MP270/277/370/377 Panels This driver provides connectivity from Siemens WinCC flexible on MP270, MP277, MP370 and MP377 Panels to S7-200, S7-300, and S7-400 series PLCs via Industrial Ethernet (i.e. TCP/IP Ethernet). 145. TOP Server Simatic 505 Ethernet Driver for Siemens MP270/277/370/377 Panels This driver provides connectivity from Siemens WinCC flexible on MP270, MP277, MP370 and MP377 Panels to Siemens/TI/Simatic 505 Series PLCs via Ethernet using either the CP1434-TCP card in the PLC or CTI-2572 card in the PLC. 146. Torque Tool Ethernet Driver The TOP Server Torque Tool Ethernet Driver is designed to work with any device that supports the Torque Tool Open Protocol. It is intended for use with applications such as HMIs or custom applications that support OPC, Fast DDE, SuiteLink, AdvancedDDE, NIO/PDB and DDE to connect them to Torque Tool devices communicating over Ethernet, such as the Stanley QA Alpha Controller and Atlas Copco Power Focus units. 147. Toshiba PLCs Serial & Ethernet Suite (OPC, FastDDE,SuiteLink,AdvancedDDE) This communications driver product is intended for use with applications such as Wonderware,WinCC,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Toshiba PLCs via Ethernet or ComputerLink Serial protocol. This driver is unique in that it provides built in support for dial up modems and also supports Ethernet Encapsulation on the serial driver. 148. Toyopuc PC2 PLCs Serial TOP Server (OPC, FastDDE,SuiteLink,AdvanceDDE) Connect ToyoPuc PC2 PLCs via Serial Computer Link Connections to HMI applications and other OPC client software using this OPC server software product. 149. Toyopuc PC2/PC3/PC10G PLCs Ethernet TOP Server (OPC, FastDDE,SuiteLink) Connect Toyopuc PC2, PC3 and PC10G PLCs via TCP/IP Ethernet connections to HMI applications and other OPC client applications using this OPC server. 150. Triconex TSAA Ethernet TOP Server OPC and IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Triconex Tricon or Trident Control Systems via TSAA Ethernet Protocol. 151. Upgrade to SWTB Extender for VS.NET and OPC DA for OPC Data Control Users For existing licensees of our OPC Data Control, this upgrade provides everything you need to connect your Visual Studio.NET 2003/2005 application to your target OPC Data Access (DA) server(s) and build OPC client applications without writing code. 152. Upgrade to SWTB Extender for VS.NET and OPC DA for OPC Data.NET Users For existing licensees of our Opc Data.NET or OPC Web Client products, this upgrade provides everything you need to connect your Visual Studio.NET 2003/2005 application to your target OPC Data Access (DA) server(s) and build OPC client applications without writing code. 153. User Configurable Driver (UCON) The TOP Server User Configurable Driver is used for serial and ethernet devices for which an off-the-shelf driver is not available. The driver is completely integrated into the TOP Server just like any other driver in the TOP Server family - the difference is that you configure the UCON driver to use a specific protocol you setup to talk to your device. 154. Wago 750 Ethernet I/O Top Server - OPC, FastDDE, Suitelink, AdvancedDDE This communications driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Wago brand Ethernet based I/O via either their 750-342 buscoupler or 750-842 Programmable Fieldbus Controller. This driver is unique in that it provides built in support for dial up modems and also supports Ethernet Encapsulation. 155. WedgeLink Lite Keyboard Wedge Software Wedgelink Light is a highly affordable way to get data from a variety of serial devices into your windows software applications. Wedgelink Lite takes data from the computer serial port and then it feeds the data to your application as if it were human keyboard input. For many data entry and quality control applications, this type of solution is the most affordable way to get your serial device data into your applications. 156. Wedgelink Network Edition Keyboard Wedge Software Wedgelink Network Edition is a powerful yet affordable way to get data from a variety of serial and TCP/IP Ethernet devices into your windows software applications. Wedgelink takes data from the computer serial port or TCP/IP Ethernet connection, allows you to parse it, and then it feeds the data to your application as if it were human keyboard input. For many data entry and quality control applications, this type of solution is the most affordable way to read your serial or TCP/IP device. 157. WedgeLink Standard Edition Keyboard Wedge Software Wedgelink Standard Edition is a powerful yet affordable way to get data from a variety of serial devices into your windows software applications. Wedgelink takes data from the computer serial port, allows you to parse it, and then it feeds the data to your application as if it were human keyboard input. For many data entry and quality control applications, this type of solution is the most affordable way to get your serial device data into your applications. 158. Yaskawa Memobus Plus Top Server- OPC, FastDDE, Suitelink, AdvancedDDE This communications driver product is intended for use with applications such as Wonderware,WinCC,ProTool/Pro,Intellution,Iconics,Indusoft,Cimplicity,and many other applications that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to MemoBus Plus compatible Yaskawa PLCs. 159. Yaskawa MP Ethernet + MP Serial TOP Server This communications driver product is intended for use with applications such as Wonderware, WinCC, ProTool/Pro, Intellution, Iconics, Indusoft, Cimplicity, and many other applications that support OPC, FastDDE, SuiteLink, AdvanceDDE and DDE to connect them to MP Ethernet (Yaskawa MP 920 PLCs using the 218IF card in the PLC rack and a generic Ethernet card in the PC) and MP Serial (Yaskawa MP and GL Series PLCs) devices. 160. Yokogawa Green Series Controllers Serial TOP Server Driver This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Yokogawa Green Series Controllers using communication devices such as UT37, UT38, and UP27 as well as devices that support standard PCLink communications protocol. This driver is unique in that it provides built in support for dial up modems and also supports automatic tag database generation. 161. Yokogawa OPC Server Suite This OPC server suite provides you with serial and Ethernet drivers to connect to Yokogawa DX100/200 Series, DXP Series, MX100, and Darwin Series Data Acquisition Systems. One low price gets you all 4 products. Use this OPC server to connect your PC and OPC compliant software applications to Yokogawa Data Acquisition systems. All of our Yokogawa drivers support our powerful Automatic Tag Database Generation feature making them the easiest to use on the market. 162. Yokogawa YS100 Serial TOP Server OPC and IO Server This product is intended for use with applications such as HMIs that support OPC, FastDDE, SuiteLink, AdvancedDDE and DDE to connect them to Yokogawa YS150 and YS170 devices that use the Yokogawa YS100 serial command response message protocol. This driver is unique in that it provides built in support for dial up modems and also supports our Ethernet Encapsulation techniques.